0.5mm Front Camber Shim

This 0.5mm front camber shim is a precision aluminum spacer used to fine-tune front wheel camber on the Rush SR. Shims stack at the upright camber plate mounting points to dial in the exact camber angle needed for your setup or track conditions.

The baseline front camber setting is 1.8° negative, achieved with a 5mm shim stack. Adding or removing 0.5mm shims allows small, incremental adjustments without large jumps in geometry. When adjusting your total shim thickness, note that the required camber bolt length changes depending on stack height — use a 55mm bolt for shim stacks under 4mm, and a 60mm bolt for stacks over 4mm. Torque camber bolts to 40 ft-lb with blue Loctite 243.

This is an OEM component. Sold individually.