1.0 Front Camber Shim

SKU: 010601021A

Category: Front Left Upright Base > Front Right Upright Base

1.0 Front Camber Shim

Price: $4.95 (In Stock)

1.0mm front camber shim for the Rush SR, used to fine-tune front camber angle by stacking under the camber plate mounting points. Sold individually.

A 1.0mm precision shim used to adjust front camber on the Rush SR. Shims stack under the front camber plate mounting points to dial in camber angle — adding or removing shims changes the camber setting in small, repeatable increments.

The baseline front camber setup calls for 5mm of shim per side, with a target of 1.8° negative camber. This 1.0mm shim allows fine adjustments to that baseline. Note that front camber bolt length depends on total shim stack thickness: use a 55mm bolt when the shim stack is under 4mm, and a 60mm bolt when it exceeds 4mm. Camber bolts should be torqued to 40 ft-lb with blue Loctite 243.

Sold individually. These shims are standard setup components on the Rush SR — not an upgrade part.

⚡ Cached with atec Page Cache